Fabrication and Welding
General fabrication starts at $240/hr
Removing stock baffles and welding 2 AN bungs (your choice of 6AN-10AN) to your valve cover costs $150 for DSMs and $120 for Honda/Acura covers.
Stock DSM baffles are replaced with a small "Shield" to prevent oil from splashing into the bung and going into the hose.
PLEASE NOTE- Paint and powder coat will need to be removed for bungs to weld to your valve cover. Discount available for clean, well prep'd inside and out BARE metal valve covers.
EVO valve covers are Magnesium and this service cannot be done. However, they can be drilled and tapped for an NPT to AN bung.
Removing stock baffles and welding 2 AN bungs (your choice of 6AN-10AN) to your valve cover costs $150 for DSMs and $120 for Honda/Acura covers.
Stock DSM baffles are replaced with a small "Shield" to prevent oil from splashing into the bung and going into the hose.
PLEASE NOTE- Paint and powder coat will need to be removed for bungs to weld to your valve cover. Discount available for clean, well prep'd inside and out BARE metal valve covers.
EVO valve covers are Magnesium and this service cannot be done. However, they can be drilled and tapped for an NPT to AN bung.
